Dobinsons USA

SS80-3844

Dobinsons Black 30' Long Kinetic Recovery Rope 8,600 KGS

Product Description

  • Rated at 19,000 LBS (8,600 KG), 3/4" diameter (19mm), 30 FT Total Length
  • UV & Water Resistant, made from High Quality 66 Grade Nylon
  • Lightweight high strength Double Braided 24 Strand Design
  • Spliced & Stitched End Loops with Protective Sleeves
  • NATA Approved, Australian Laboratory Tested
Dobinsons 4x4 Kinetic Recovery Ropes are all rated to their listed capacity, and offer a 30% Stretch Factor, giving almost 50% more stretch than a conventional snatch strap. The strap will store kinetic energy exerted on it, making it up to 30% longer than normal (39ft max) and then use that force to help pull the stuck vehicle out.

Each strap features Protective Sleeves over the ends to prevent the strap from being cut, rendering it unusable. The 4x4 Straps are intended to be fully cleaned in water only after each use to ensure that the dust/dirt does not become abrasive to the strap, shortening the life span. The easiest way to do this is to lay it out in your driveway and hose with fresh clean water, or rinse in a large bucket, constantly changing out the water as it becomes dirty.

ADVISORY: The minimum breaking strength of the strap should be between 2 and 3 times the gross vehicle mass (GVM) of the vehicle. The strap MUST be suited to the GVM of the lighter of the 2 vehicles used in the recovery process.  

    Specifications 

    • Rated at 19,000 LBS (8,600 KG), 3/4" diameter (19mm), 30 FT Total Length
    • UV & Water Resistant, made from High Quality 66 Grade Nylon
    • Lightweight high strength Double Braided 24 Strand Design
    • Spliced & Stitched End Loops with Protective Sleeves
    • NATA Approved, Australian Laboratory Tested

    Warranty

    Dobinsons Spring & Suspension™ at its sole discretion will repair or replace any products supplied by them that are found to be defective in either materials or workmanship providing that Dobinsons Spring & Suspension™ are actually notified in writing from the Client of the alleged defect within two years (2 years) from date of invoice for Coil Springs, Leaf Springs and Shock Absorbers, and within twelve months (12 months) from date of invoice for all other parts. Any claim not made within this period shall conclusively be deemed waived by the Client. Repair or replacement is pre-conditioned on the examination of the goods which on instructions from Dobinsons Spring & Suspension™ on, should be returned for further inspection to Dobinsons Spring & Suspension™ or to an Approved Importer.

    Coverage

    Coil Springs:2 Years- Unlimited Miles

    • Faulty Manufacture (non-cosmetic)
    • Breakage
    • Sagging (being loss of free height of more than 10mm)

    Leaf Springs:2 Years- Unlimited Miles

    • Faulty Manufacture (non-cosmetic)
    • Breakage
    • Sagging (being the loss of free camber by more than 12mm)

    Shock Absorbers:2 Years- Unlimited Miles 

    •  Faulty Manufacture(non-cosmetic)

    Fridges:5 Years- Compressor only

    • 1 Year- Faulty Manufacture (non-cosmetic)

    Winches:2 Year

    • Faulty Manufacture (non-cosmetic)

    All Other:1 Year

    • Faulty Manufacture (non-cosmetic)

    The Fine Print

    Gria Enterprises (Rugged Outlander) or Dobinsons Spring & Suspension™ will not pay for costs incurred in forwarding or returning goods. This warranty does not cover and Gria Enterprises or Dobinsons Spring & Suspension™ makes no warranty with respect to; (1) any merchandise that is abused, misused, misapplied, neglected or altered; or that is improperly or incorrectly installed or maintained or used; or that is subjected to abnormal conditions of use, temperature, moisture, dirt or corrosive matter; (2) Goods bought for industrial, mining or agricultural use; (3) Goods no longer required by Client; (4) Goods incorrectly chosen by Client; (5) Goods modified or altered by client; and (6) any merchandise, materials, parts or other components supplied by someone other than Dobinsons Spring & Suspension™.

    In the event that a rebuildable component qualifies for warranty coverage, Dobinsons Spring and Suspension™  necessitates the return of said component for repair or replacement. Alternatively, Dobinsons Spring and Suspension™  reserves the right to impose a Core Charge, with full refund contingent upon the subsequent return of the warranted component.

    Gria Enterprises or Dobinsons Spring & Suspension™ shall not be liable for any expenses incurred by Client in order to remedy any defect in its product. Gria Enterprises or Dobinsons Spring & Suspension™ shall not be liable for any consequential, special, indirect or contingent damage or expense arising Directly or Indirectly from any defect in its products or from use of any products.

    Client agrees to indemnify and hold Gria Enterprises or Dobinsons Spring & Suspension™ harmless from and against any loss, injury or damage, to person or property, that extends beyond the warranties set forth above, whether the claims against Gria Enterprises or Dobinsons Spring & Suspension™ or the damages are incidental or consequential.

    Installation of aftermarket items to your vehicle may adversely affect, void or violate the Manufacturers terms of warranty on your vehicle. Review the terms of your vehicle warranty prior to purchase and/or installation of any aftermarket part or accessory. Gria Enterprises or Dobinsons Spring & Suspension™ does not make any representations or warranties of any kind as to suitability or fitness for a particular vehicle or purpose. Gria Enterprises or Dobinsons Spring & Suspension™ shall not be responsible or liable for direct or indirect damages as a result of the purchase and/or installation of these aftermarket products.

    Subscribe

    Get Rugged with us