Baja Rack

BR-TY4RG5-LG-MESH-NSR-0

Baja Rack 4Runner G5 Standard Basket Long Rack without sunroof cutout-mesh floor 2010-2021

Product Description

This standard long rack (with mesh floor) is made without a sunroof cutout and will add much needed cargo space to your vehicle to tackle your adventures. The installation is done directly to the body frame without drilling, the outside frame is made of 1 inch tubing and the flooring with 1/2 inch cold roll steel tubing and 3/4 inch steel mesh.

This rack was designed around the 4 factory mounting positions on the roof of the vehicle without obstructing the operation of the sunroof, there is a cutoff on the floor of the rack to avoid interference with the roof antenna. No drilling required.

IF YOU BUY A RACK + LADDER PLEASE CHECK THIS NOTE:

Before you install your new BajaRack laddercheck the gap on top of the hatch it needs to be 5/16” to 3/8” inch, if the upper top of the ladder does not enter the gap on the hatch do not install, and check the gap clearance with a dealer or shop.

EXTREMELY IMPORTANT NOTE:

Please verify the lip (edge) measurement before purchasing or installing your ladder, the standard dimension is between 0.100” (0.254mm) and 0.200” (0.508mm) if this dimension is larger than 0.200” (0.508mm)  don’t install the ladder, Toyota in some models applies more sealant in this area that can cause the ladder to not fit.

Installation Guide

    Specifications

    Each rack includes all mounting brackets, stainless steel hardware, and aluminum wind deflector.

    Material and Thickness:
     1” (25.4mm), ¾” (19.05mm),1/2’”(12.7mm) Steel tubing and ¾” (19.05mm) Steel mesh.
    Top Wind Deflector: 0.062” (1.57mm), 5050-H32 Aluminum
    Finish: Epoxy primer (rust inhibitor) with black powder coating
    Rack weight: 95 Lb (43.1 Kg).
    Load Capacity: Dynamic (while driving) 300Lb (136 kg); Static 600Lb (272 kg)
    Measurements: 91”(2311.4 mm) Long x 46” (1168.4 mm) Wide x 5” (127 mm) tall
    Total Height (Top of roof to top of rack): 8.25"
    Mounting method: Roof mounts (2 front adjustable brackets and 4 support brackets)

    Warranty

    This Limited Warranty covers BajaRack products and all accessories for a period of 2 years from the date of purchase to the original owner of the product and does not apply once the equipment is sold or transferred to another person. 

    This Warranty does not cover the cost of removal or reinstallation of the product; Nor does it cover the cost of shipping damaged or replacement parts. 

    Rugged Outlander and BajaRack are not liable for damage caused by shipping or transport of BajaRack products. It is the responsibility of the original retail purchaser to inspect all products prior to acceptance and to notify the shipping carrier in a timely manner so that any claim for damages can be made. If timely notification to the shipping carrier by the original retail purchaser is not made regarding damage caused during the transport of the product, a claim for damages may not be possible, and all liability falls to the original retail purchaser. This warranty does not apply if accident, abuse, misuse, collision, overloading, modification, misapplication, improper installation, damage caused by non-BajaRack accessories, or improper service has damaged the Product. 

    Shipping

    FREE Shipping:
    We offer free shipping for orders of $200 and above. 

    Where do we ship?
    Currently, we only ship within the 48 contiguous states. Please check back in the future as these may change.
    Find more information about our shipping policy